Position: Index > Unclassified >

Tv modulator

2017-08-15 05:02  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

TheVHFfrequency is generated by a tuned Hartley oscillator circuit. Resistors R2, R3, and R4 bias the transistor, with tapped inductor LI and trimmer capacitor Cl forming the tank circuit. Adjusting Cl determines the frequency. Capacitor C2 provides positive feedback from the tank circuit to the emitter at Q1. Capacitor C4 provides an RF ground for the base of Ql. Bypass capacitor C5 and resistor Rl filter out the radio frequencies generated in the tank circuit to prevent radiation from the power-supply lines.

Tv modulator 
 

The video signal enters the parallel combination of resistors R5 and R6; this combination closely matches the 75 ohm impedance of most video cables. Resistor R6 is a small screwdriver-adjusted potentiometer that is used to control the video input level to mixer diodes Dl and D2.