Position: Index > Unclassified >

Tweeter Crossover circuit

2018-05-02 03:19  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

Tweeter Crossover Circuit

Description

A single coil speaker is not good in handling high and low frequency at the same time. If we could filter out the low frequency and play it through a tweeter ,it will produce more sound quality than using a single speaker.This is what is realized here.Here the high frequencies are filtered out using a low pass filter made of C1,C2 and R1 and send to the tweeter.The low frequency is only fed to the woofer.

Crossover Circuit Diagram with Parts List

Speaker Crossover Circuit

Tweeter Crossover Circuit Diagram

Notes

    The tweeter can be a 2 to 3 inch, 4 to 8 Ohm one .R1 is used to adjust match the the tweeters output level to that of woofer.C1 and C2 are electrolytic capacitors.R1 should be rated more than 2 Watts.

    We have more interesting Audio Circuits in our website, which you would like to look:

    1. Mini Amplifier Circuit

    2. Hi Fi Amplifier Circuit

    3. 150 Watt Amplifier

    4. Audio Level Meter

    5.? 3 Watt Stereo Amplifier


    Reprinted Url Of This Article:
    http://www.circuitstoday.com/tweeter-crossover-circuit