Up Down BCD counter Tutor (OPA627AUE4)

This article describes the Up Down BCD counter Tutor (OPA627AUE4). The content is very simple, very helpful. Components in this article can help you understand better understanding of this article. For example, in this article, you can go to find and buy these components:OPA627AUE4.
If you have a high-quality knowledge of the circuit, please contact us. We appreciate your sharing what you know schematic knowledge to us.

See a Tutor that will help you take the first step in digital electronics.



Counter Lab - The Counter can be tested by clicking the buttons given below, Watch the LEDs and seven segment display. Inc, Dec, and Set buttons are momentary acting and Clk Button is latching  type. The Dip Switch  in the Left also can be set by clicking on each of them, watch the switch and LEDs after a click.

a. Set the DIP Switch as you like and then Press the Set button.  Now you will see the BCD value in the yellow LEDs named 4029 output. The Decimal value will be seen in the seven segment Display. Now try for different dip switch settings and see the BCD LEDs and Decimal output.

b. Now Press The Inc and Dec pushbuttons and See the corresponding green LEDs which indicate the state of the Nand gate 4093 Flip Flop. Set it to Increment up-count or Decrement which is down-count.

c. Now Click the Clk - clock or count button, the switch will latch, press it again to release.  If you toggle  it once the counter will get a single pulse and it will count it, see the BCD and decimal displays. Now  you turn it on and leave it,  the counter will keep counting one per second till you turn it off, the clock nand gate is wired to be an oscillator.