Position: Index > Unclassified >

Waveform Generator with ICL 8038CCPD

2017-09-04 22:41  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


That circuit is based on a 14-pin DIL IC capable of producing sine, square, triangular, sawtooth and pulse waveforms of high accuracy and stability. The frequency may be selected to be from 0.001Hz to 1Mhz, Frequency modulation and sweeping can be accomplished with an external voltage and the frequency can be programmed digitally by resistors or capacitors. Sweep range can be up to 40:1 or 1000:1 with a little less quality.
Waveform Generator with ICL 8038CCPD

The circuit shows a sine, triangle and square wave generator. SW1 is the range switch, SW2 sets the waveshape, VR4 sets the output level and VR3 is the frequency control. VR1 and VR2 should be adjusted to give minimum distortion of sine wave.


Datasheet file1: Click here to download 8038CCPD.pdf datasheet.

Datasheet file2: Click here to download LF351.pdf datasheet.


Reprinted Url Of This Article:
http://www.next.gr/oscillators/varius-circuits/waveform-generator-with-icl-8038-ccpd-l11745.html