Position: Index > Unclassified >

Wide-bandwidth-peak-detector

2017-09-05 03:55  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


This circuit can detect the positive peaks for signal frequencies higher than 5 MHz. It yields ?±1% accuracy for 400 mV to 4 V pk-pk signal amplitudes on sine, square, and triangular waveforms. The Am685 comparator output increases whenever VrN is a greater negative voltage than Vour; the high comparator output, in turn, charges C1 in a positive direction. The CA3140 op amp amplifies the C1 voltage with respect to the ECL-switching-threshold voltage ( -1.3 V) developed by diodes D1 and D2. For repetitive waveforms, each cycle boosts Vaur until it equals the peak input value. The peak-detection process is aided by the comparator`s open-emitter output, which allows C1 to charge rapidly through R2, but to discharge slowly through R2 and Rl.
Wide-bandwidth-peak-detector

Reducing the value of Cl shortens system-response times. Although the circuit can`t detect negative-going peaks, it can be modified to measure the pk-pk value of bipolar signals that are symmetric about ground. To do so, divide Vour by 2 using two 1-K!l resistors and feed the comparator Vour/2 rather than Vour.



Reprinted Url Of This Article:
http://www.next.gr/sens-detectors/various-circuits/wide-bandwidth-peak-detector-l13272.html