Position: Index > Unclassified >

WinPic PIC Programmer Software Download

2017-12-22 01:36  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

WinPic PIC Programmer to program the PIC firmware from a HEX-file

WinPic PIC Programmer Software Download

This is a simple program for Win95/98/XP to program the PIC firmware from a HEX-file (the type generated by Microchip’s MPLABTM) into a PIC microcontroller.Most modern PICs (like the PIC16F84, 16F628, 12F675, dsPIC30Fxxxx) can be reprogrammed many times, because the program can be erased electrically (the code is stored in a FLASH, not a simple ROM). Some of the “very simple” programmer interfaces can be used, a few of them are described in the manual.


serial interface: compatible to the “COM84″, “JDM”, and user-defined
Most interfaces for the COM-port should work without a special port-access driver, and may even work with USB<->RS-232 adapters now !parallel interface: compatible with SM6LKM’s “PIP84″-interfacemany other interfaces can be driven with a simple interface definition file (see manual)exotic interfaces can be supported through a specialized hardware-interface DLL (plugin)possibility to verify the PIC at different voltages (almost “production grade”)requires a PC with WIN95, Win98, Win XP (Win NT 4.0 and Win2000 not tested)Code memory size now up to 8192 words, data EEPROM memory up to 256 byte.Code and data memory may be programmed separatelyBulk erase (“erase all”) or individual programming of all bytes present in from HEX-fileBuilt-in “hex editor” for quick patches in code or data EEPROM memoryInvocation with command line arguments is possible, so you can run WinPic from a shellExtra window with “Reload & program” function (always in front of others)WinPic now also supports JDM PIC-programmer 2, Velleman K8048, the Hoodmicro, the Willem interface, El Cheapo, and many others. The only(?) interfaces which WinPic doesn’t support are Microchip’s “PicStart plus” (far too expensive) and “PicKit2″ .Thanks to various collaborators, a French, ?Greek, Portugese, Spanish,?and Turkish translation of WinPic’s user interface is available. All languages are now contained in the installer (no need to download anything separately)Besides SMPORT, the PortTalk driver can be used. It proved to be faster under WinXP, especially when programming larger PICs (dsPIC and PIC18F).

Supported PIC microcontrollers

dsPIC30F2010 (theoretically ALL dsPIC30F devices supported, a few tested)PIC16C61, PIC16C71PIC16C84, PIC16F84PIC16C710, PIC16C711, PIC16C715PIC10F200, PIC10F202, PIC10F204,?PIC10F206PIC12F629, PIC12F635, PIC12F675, PIC12F683PIC12F609, PIC16F610, PIC12F615, PIC16F616 (new since 2007-06)PIC16F627, PIC16F627A, PIC16F628, PIC16F628APIC16F630, PIC16F636, PIC16F648APIC16F676, PIC16F684, PIC16F688PIC16F73, PIC16F737, PIC16F74, PIC16F76, PIC16F77PIC16F818, PIC16F819PIC16F87, PIC16F88PIC16F873A…PIC16F877APIC16F88PIC18F242, PIC18F248, PIC18F252, PIC18F258PIC18F442, PIC18F448, PIC18F452, PIC18F458PIC18F2XX0/2XX5/4XX0/4XX5 (tested: PIC18F2550)and other “quite compatible” devices, if you have the datasheet and a text editor !

Help file including with this software.


WinPic PIC Programmer softwareWinPic PIC Programmer to program the PIC firmware from a HEX-file

Please send your ideas, which are very important for our success…

Reprinted Url Of This Article: