Position: Index >

How to build Video signal emphasis

2016-09-13 00:04  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

Description

With this circuit we can amplification selectively the high signal of picture frequencies [Video] with result bigger clarity than this. The circuit should be placed between a Video unit and the reception Scart or the plug Video input of television receiver. The designing is simple, it?s based in three only transistor. The first stage of Q1 function as isolator - adapter of input impedance. The second stage round the Q2 in common base connection which the gain is determined by the TR2. The TR1, R6 and C3 determine the frequency response. The third stage round the Q3 works as output buffer and 75-ohm line driver. The TR2 should be regulated in a place where the circuit output voltage, to be 1Vp-p, in 75 ohm load. The circuit functions with 12Volts - 50mA well stabilized.

Circuit diagram

Circuit diagram

Part List

R1=82ohmR2=5.6KohmR3-9-11=2.7KohmR4=330ohmR5=220ohmR6=470ohmR7=270ohmR8=12KohmR10=2.2KohmR12=180ohmR13=68ohmC1-4-5=100uF 16VC2=2200uF 16VC3=470pF ceramicC6=470uF 16VC7=220uF 16VC8=100nF 100V MKTTR1=250ohm trimmerTR2=500ohm trimmerD1=1N4148Q1-2-3=BC547J1-2=Female RCA jackJ3=2pin connector 2.54mm step

Video signal emphasis PCB

Video signal emphasis PCB







Reprinted Url Of This Article:
http://www.circuit-finder.com/categories/video/512/video-signal-emphasis