Position: Index >

Remote Video System Multiplexer (FDC3601N)

2016-09-12 02:50  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This article describes the Remote Video System Multiplexer (FDC3601N). The content is very simple, very helpful. Components in this article can help you understand better understanding of this article. For example, in this article, you can go to find and buy these components:FDC3601N.

Combination 8 channel multiplexer and amplifier (IC1) is the heart of the remote multiplexer box in the single coax video system. The MUX baseband video output is coupled by C11 to the coax and the video is decoupled by L1 from dc power arriving on the same line. All circuitry in the multiplexer box is supplied by this power (about 30 mA at 10 V).


Video System Remote Multiplexer Box circuit schematic

Channel-select signals generated at the interface box (11 pulse for channel 0, 8 pulses for channel7) pulse the 10-V supply to 8.8 V and back at a 10-Hz rate. These pulses is converted by Q1 and associated components in the remote multiplexer box to 5V logic levels, which block the 4 bit counter IC2. In turn, the desired multiplexer channel is selected by IC2. Channel 0 is selected by the first pulse of a burst. Subsequent pulses, arriving before the discharge of timeout network R13/C13 advance IC2 by one count each. Thus, channel 0 appears almost instantly and when selected, channel 1 appears near the end of a 0.8s burst. [Circuit's schematic diagram source: seekic.com]




Reprinted Url Of This Article: