Position: Index >

Video Line Driver (LT1206)

2016-09-12 12:25  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This article describes the Video Line Driver (LT1206). The content is very simple, very helpful. Components in this article can help you understand better understanding of this article. For example, in this article, you can go to find and buy these components:LT1206.

For driving multiple video cables, the suitable component is LT1206 because it has low output impedance, 60MHz bandwidth and 250mA output current capability. But don’t forget about unterminated line effect when driving multiple cables. A crosstalk to other lines caused by a reflected wave is propagate back to the driver because the driver output is non zero impedance. Here is the schematic diagram:

video distributor circuit circuit schematic diagram

In this circuit the LT1206 connected as a distribution amplifier. Each line is separately terminated to minimize the effect of reflection. To build this circuit we must must consider about phase performance and differential gain. It will useful if the signal is video composite. Note that the output impedance of LT1206? is only 0.6W at 5MHz, much smaller than the terminating resistor separators.


Reprinted Url Of This Article:
http://wiringdiagramcircuit.com/video-line-driver-2/